en ru

RADIK CLEAN VK

Steel panel radiator for rooms with high demands on hygiene and cleanness with right bottom connection

Steel panel radiator for rooms with high demands on hygiene and cleanness with right bottom connection

RADIK CLEAN VK  is a steel panel radiator in the VENTIL KOMPAKT version which allows a bottom right connection to the heating system. It is designed for pressurised heating systems.

It has been modified for installation and operation in rooms with higher demands on hygiene and cleanness. All types are supplied without convector fins, top grills and side panels.

There are two upper and two lower hangers welded at the back side of the radiator. Radiators in length 1800 mm and more have six hangers. An air vent and blanking plugs are delivered as standard. We recommend using the drill-in brackets (type 18/120 – see the KORAMONT catalogue) which enable to mount the radiator in a distance of up to 65 mm from the wall.

Notice: If the requested distance between the radiator and the wall should be 65 ÷ 80 mm, the same type of brackets can be used on condition that the lower hangers are fixed with brackets (not with supporting pieces only). In such a case the additional brackets must be ordered extra.

Note: The RADIK CLEAN VK type 10 and RADIK VK type 10 radiators are identical.

Technical Data

Height (H) 300, 400, 500, 600, 900 mm
Length (L) 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000 mm
Depth (B)
- Type 10 CLEAN VK 47 mm
- Type 20S CLEAN VK 100 mm
- Type 30 CLEAN VK 155 mm
Connecting pitch 50 mm
Connecting thread 6 × G½ inside
Highest allowed working pressure 10 bar
Highest allowed working temperature (°C) 110 °C
Radiator connection right bottom
Pressure Loss

In case of two-pipe heating system it is necessary to calculate the correct level of valve presetting and specify this in the project documentation to ensure a proper function of the heating system. This must be kept by the installer during installation of the heating system.

In case of one-pipe heating system it is necessary to set the valve at level 6. For adjusting the required mass flow in the radiator we recommend to use the compact connecting fitting with a fixed or adjustable flow volume of water in the radiator.


Heat output [W]

Heat output calculated to ∆T= 50; (t1/t2/ti = for 75/65/20 °C)

Type 10 CLEAN VK Type 20S CLEAN VK Type 30 CLEAN VK
Height [mm] Height [mm] Height [mm]
Length [mm] 300 400 500 600 900 500 600 900 500 600 900
400 206 242 350 359 417 585 512 593 834
500 165 212 257 302 438 449 522 732 640 741 1042
600 198 254 308 362 525 538 626 878 767 889 1250
700 360 423 613 628 730 1024 895 1037 1459
800 411 483 700 718 834 1170 1023 1186 1667
900 463 544 788 807 939 1317 1151 1334 1876
1000 514 604 875 897 1043 1463 1279 1482 2084
1100 565 664 963 987 1147 1609 1407 1630 2292
1200 617 725 1050 1076 1252 1756 1535 1778 2501
1400 720 846 1225 1256 1460 2048 1791 2075 2918
1600 822 966 1400 1435 1669 2341 2046 2371 3334
1800 925 1087 1615 1877 2302 2668
2000 1028 1208 1794 2086 2558 2964

Types of Connection

News